|
Product Details:
|
Product Name: | HDPE PIPE Manual Butt Fusion Welding Machine | Size: | SHT160 |
---|---|---|---|
Pipe Size: | 63.75.90.110.125.140.160 | Heating Plate Max. Temp: | 270℃ |
Total Power: | 2.4KW | Weight: | 35kg |
Dimension: | 68*54*53CM | ||
High Light: | PE Manual Butt Fusion Welding Machine,2.4KW Manual Butt Fusion Welding Machine,PPR Pipe Butt Fusion Welding Machine |
Good Performance Manual Butt Fusion Welding Machine For PE PPR Pipe
1. The machine is used to weld pipes made from PE, PP, PVDF and cannot be used to weld material without description otherwise the machine may be damaged or some accident may be resulted in.
2. Don't use the machine in a place with potential hazard of explosion
3. The machine should be operated by responsible, qualified and trained personnel
4. The machine should be operated on a dry area. The protective measures should be adopted when it's used in rain or on wet ground.
5. The machine is operated by 220v±10%, 50Hz, if extended wire should be used, it should have enough lead section according to its length.
Butt Fushion Welding Machine Technical data:
item | SHT160-2/4(A) | SHT200-2/4(A) | SHT250-2/4(A) |
Working Range | 63-160mm | 63-200mm | 90-250mm |
Caliber (mm) | 63, 75, 90, 110, 125, 140, 160 | 63, 75, 90, 110, 125, 140, 160, 180, 200 | 90, 110, 125, 140, 160, 180, 200, 225, 250 |
Heating board max temp. | 270 °C | 270 °C | 270 °C |
Temperature bias | “+/-5° | “+/-5° | *+/-5°C |
Heating plate power | 1.6 Kw | 1.8 Kw | 2.2 Kw |
Power of Heating plate: | 0.8 Kw | 0.8 Kw/1.2Kw | 1.45Kw/2.2Kw |
Total power | 2.4 Kw | 2.6 Kw/3.2Kw | 3.65Kw/4.7 Kw |
2(A) G.W./N.W.: | 35/32 kgs | 50/44 kgs | 83/70kg |
2(A) Packing size: | 55*47*52 cm | 67*47*53 cm | 76*55*58 cm |
4(A) G.W./N.W.: | 47/42 kgs | 52/46 kgs | 110/95kg |
4(A) Packing size: | 68*54*53 cm | 74*59*56 cm | 90*67*54 cm |
Other name:
PE Pipe Welding Machine, But Fusion Welding Machine, Hotmelt Welding Machine, Hydraulic butt
fusion welding machine. Hydraulic butt welding machine, HDPE butt fusion machine. Welding machine. Butt fusion Equipment.
Details of plastic pipe welding machine
Main Body
The main body supports and center the plastic pipes with two fixed and two movable clamps.
Using the hydraulic pressure on the system, the two pistons on the carrying metal bars move the clamps forward and backward and supply the necessary movement for the welding process.
Milling Cutter
The milling cutter is the tool which clean and smooth the both ends of the pipes before the heating process.
Heater
The pipe ends will be heated by this heater before the welding process. The setting of the heater will be done by the thermostat on the plates. Butt welding machine PTFE-coated heating element and uniform surface temperature.
Preparation for welding HDPE Pipe manual Butt Fusion Welding Machine
1. Before operation, all equipment parts shall be placed on a stable and dry place.
2. Confirm that the power supply used meets the requirements of the equipment, the equipment is in good condition, and the electrical circuit is not damaged; the detection indicator works normally, the milling cutter blade is sharp, and the parts and operating tools are complete.
3. Replace the required fixture according to the outer diameter of the welded pipe.
Different welding method for different Pipe:
Application
Our service:
1) We offer 1 year warranty and free spare parts. (Except for wearing parts)
2) We offer voltage and frequency of motor customization service, such as 110v 60hz.
3) We can put your LOGO on machine plate or packing (need your authorization on brand)
4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.
Contact Person: Mrs. Vivian Chen
Tel: 86 13777804353