Hydraulic 1.5Kw Electric Water Test Pump 0 - 4MPA Pressure

Strong Power 1.5Kw Hydraulic Electric Pressure Testing Pump Water Pump

Strong Power Hydro Electric Pressure Testing Pump Water Pump

Specification of Electrical Pressure Test Pump

4dsy series electric pressure test pump is an ideal equipment for obtaining high-pressure liquid in laboratory and hydrostatic test for all kinds of pressure vessels, pipelines, boilers, valves, pressure vessels and fire-fighting equipment. Pressure test pump products and supporting pressure test and test projects have been applied to pressure test in aviation field and in key national defense scientific research and development projects, such as high pressure blasting test, deep sea test, space technology, high temperature and high pressure test, special-shaped pipe test, etc.
The pressure test pump is specially designed according to the requirements of hydraulic test. In the initial stage of pressure test, it has large flow, rapid liquid filling and pressure rise, so as to shorten the experimental time. When the pressure exceeds 1.6Mpa, in order to make the pressure test process more stable and slow. The flow is automatically reduced. Therefore, the pump has two flows at high and low pressure and can change automatically. Any numerical hydrostatic test can be carried out below the rated discharge pressure.

Photo	Model	Pressure MPA	Flow volume(L/H)		Matching electic machine			G.W(KG)	Volume
			High pressure	Low pressure	Model	Power(KW)	Voltage
	4DSY-180/4	4	180	500	YS9024-T	1.1	380V	120	82*47*87cm
	4DSY-165/6.3	6.3	165	500	YS9024-T	1.1	380V	120	82*47*87cm
	4DSY-105/10	10	105	480	YS9024-T	1.1	380V	120	82*47*87cm
	4DSY-65/16	16	65	480	YS9024-T	1.1	380V	120	82*47*87cm
	4DSY-40/25	25	40	450	YS9024-T	1.5	380V	120	82*47*87cm
	4DSY-30/40	40	30	380	YS9024-T	1.5	380V	120	82*47*87cm
	4DSY-22/63	63	22	350	YS9024-T	1.5	380V	120	82*47*87cm
	4DSY-15/80	80	15	320	YS9024-T	1.5	380V	120	82*47*87cm

Our price is based on above red part, if need price for other size, pls let me know, thanks.
Aluminum / brass pump also have short type, medium-sized, long type pumps for choices.

Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .

Precautions when using electric pressure test pump
1. Before use, firstly tighten the switch clockwise.
2. The working medium used must be filtered by a 100 mesh/inch filter before being injected into the water tank, and the suction port cannot leak out of the water surface.
3. It should not be used in the workplace with acid, alkali and corrosive substances.
4. After stopping use, use kerosene or kerosene as a medium to filter it.

Be sure to loosen the red pressure regulating valve before turning it on! so as not to explode the pressure gauge

INSTRUCTION FOR USE
1. Check that the gasket and the joint are well matched, and connect the water inlet pipe correctly;
2. The fire wire and ground wire must be correctly connected before use, and must not be wrongly connected! The power cord should be connected to a socket with leakage protection.
3. Loosen the pressure regulating knob first, do not start the motor with load, so as not to damage the motor
4. Check the filter regularly to avoid clogging
5. If the water pump cannot absorb water, please add a certain amount of water from the water inlet pipe to the water pump.
6. Prevent air from entering the water pump.
7. After the pressure test is over, loosen the pressure adjustment knob, add a little 20# oil, and keep it loose. At the same time, turn on the power and add oil at the water inlet to run for half a minute.
8. It is strictly forbidden to start the machine without water, otherwise the sealing ring and piston ring will be easily damaged.
9. The water source should not have impurities, otherwise the seal will be easily stuck, which will cause the phenomenon of no water absorption.
10. Water leakage at the lower part of the pump body means that the sealing ring is damaged, and the sealing ring must be replaced.
11. Please use the pressure regulating button correctly, do not turn the pressure regulating knob to the end, otherwise the high pressure will cause high pressure damage to the meter, etc.

Our service:

What are the guarantees I can get from doing business with you?

We’re honest businessmen, working with us, your money in safe and your business in safe.
We are willing to provide guarantees throughout the transaction.
1. Your business relationship with us will be confidential to any third party.
2. We can sign confidentiality agreements for your customized products.
3. If you have a relationship with us earlier, and tell us your direct competitors, you will get a lower offer than their.
4.If the main material of the product is not in line with the order, we accept 100% refund.

There are too many similar styles, how do I choose?
Just let us know what specific requirements you have, such as the usage scenario of product, external feature, finish or color, your budget price range, etc.
We will recommend the suitable styles for you in 24 hours.

Why are the prices of the same shape products very different?
Many factors affect the price, like the production process, the materials, the parts used to meet different plumbing code, the packaging materials, the price fluctuation of raw materials, etc.We are honest sellers, we promise you will get what you pay for.
We can produce the right products to meet the standard of your sales market, and willing to provide FREE consulting services for our customers.

Can you produce customized products?
Sure, we can provide a complete set of customization solutions for You as below:
1. Laser print your LOGO on the product upon your permission.
2. Customize the packaging based on your requirements.
3. Based on existing parts, we can recommend new styles for you.
4. Endogenous output samples in 20 working days upon a piece of engineering design drawings.Provide professional pictures,professional design box and label

5. Support custom design

How long does an order take from place to delivery?
Normally the delivery time of the order quantity below 2K pcs is 30 working days.
It takes about 25-35 working days for 20ft container , and 40 working days for 40ft container.There will be a shorter delivery time for common styles. Above time is for your reference.

If there is something urgent, we shall negotiate together to get problems settled.