Ppr Water Pipe Connect Machine 20 - 63mm 800w 220 - 230v

 Socket welding is used to connect pipes using a range of different fittings, allowing for changes in the direction and diameter of pipe networks as well as creating branches from existing pipelines. The pipes are inserted into the socket weld fitting, which includes a recess to accept the pipe, making placement easy.

What is the use of fusion machine?

Fusion machines are used for the joining of plastic pipe and fittings. These tools can be used to join polypropylene, polyethylene, PVDF and ECTFE pipe. Fusion machines heat up the ends of pipes and fittings, then forces them together to form a bond. Fusion machines support pipe sizes from 1/2" to 20".

Preparation for welding
The pipe material of the butt pipe section should be the same, and the supporting materials of the same factory should be used as much as possible; the outer diameter and wall thickness of the butt pipe section should be the same; the inner and outer surfaces of the welded pipe material and pipe fittings, especially the vicinity of the port, should be smooth and smooth without any abnormality; the size of the pipe material The deviation, etc. should meet the requirements; the butt pipe section should have good processing and welding performance matching the welding machine; check the matching of the welding system and power supply, clean the heating plate, connect the power of each part of the welding machine, and should have grounding protection ; Set the heating plate temperature to the welding temperature according to the welding process parameters given by the welding machine; if it is an automatic welding machine, parameters such as heat absorption time and cooling time should also be set.