Portable Pvc Ppr Plastic Pipe Cutters 110mm 4 Inch

110mm 4inch Portable Plastic Pvc Ppr Cutter Tools Plastic Pipe Cutters
 
Plastic pipe cutter description:
Suitable for narrow spaces, the retractable control rod can make better cutting, and it can be adjusted quickly in the working field. The handle is equipped with a replaceable blade, and the cutting is close to the bell mouth. The built-in retractable deburring device is firm and stable.

The hardness is between 48-58 degrees. The blade is quenched at high temperature. Generally, hand tools are consumables between 1 and 3years.

Model	Export Packing Qty	Price for 1 pc	Packing Weight for 1 pc	Price for 1 carton	Packing Weight for 1 carton	Photo
Pipe Cutter 42mm HT8001	50 pcs/ctn	US$11.76	1 kgs	US$298.00	24 kgs
Pipe Cutter 63mm HT8015	40 pcs/ctn	US$14.20	2 kgs	US$338.00	27 kgs
Pipe Cutter 75mm HT8002	40 pcs/ctn	US$15.00	2 kgs	US$370.00	28 kgs
Rotary Pipe Cutter 63mm HT63B	20 pcs/ctn	US$16.12	2 kgs	US$212.40	25 kgs
Rotary Pipe Cutter 75mm HT75	10 pcs/ctn	US$20.52	2 kgs	US$155.20	20 kgs
Rotary Pipe Cutter 63mm HT63A	50 pcs/ctn	US$11.72	2 kgs	US$296.00	29 kgs
Rotary Pipe Cutter 110mm HT110	10 pcs/ctn	US$23.60	2.5 kgs	US$186.00	18 kgs
Rotary Pipe Cutter 160mm HT160	12 pcs/ctn	US$45.60	3 kgs	US$485.20	29 kgs

When cutting PVC pipe, it's important to get a clean, straight cut in order to make a strong weld.
We are your correct choice, thanks.

Features:
1. Cutting flexible tube, stainless steel and aluminum tubing.
2. Tuber cutter can remain in the same circle to do roll cutting.
3. Smooth roller has the groove, can stabilize bad bell mouth and cut it easily.
4. Cutter uses the GCr15 material, can accurately and sharp cut pipe fittings.
5. Some cutters equipped with spare blades.
6. Precision feed screw mechanism is enclosed to eliminate clogging and jamming.
7. Tuber cutter stays the same length for use in restricted areas.
8. Swiveled blade deburring tool for removing sharp edges from tubing.
9. Contoured knob holds spare cutter wheel.
10. Rollers are grooved for cutting close to flared end of tubing.
11. Ratchet feed mechanism speeds up cutting operation.
12. Extra wide rollers with flare cut-off groove stabilize tubing.
13. Has spare cutting wheel.

Advantages
1) Pipe cutter with special heat treatment for each of our blade we make, gives our blade the perfect hardness for longer usage.
2) Our special girding on our blades makes more shaper (no burrs) and durable. Equally alignment on each of blade makes the straight cut on the pipes.
3) We polish each of our blades carefully to eliminate the liners on the blade surface, which makes the blade more smooth and durable.
4) Strict quality control: we test our blades with latest hi-tech equipment to make sure the hardness of the blade meet our standard.
 
Attention
When product used in winter, the pipe would be put in the lukewarm water for heating at first to avoid burst because for cold and fragile at cutting. If the edge of cutter appeared wear and tear at using, loose the fixed screw and buy the same type of pipe blade for change after using, we should push down the handle and spread on rustproof oil. Product apply to rigid plastic pipe or aluminum plastic pipe, but not to be applied on electric cable line and steel pipe to avoid to cause cutter damaged seriously.
 
Note
When cutting hoses/thin tubes with this tube cutter, it is recommended to reserve a length of at least about 40mm on both sides to make the stress points even, so as to avoid inclining the cutting surface or deforming the tube.

What's the rotary pipe cutters?
Rotary pipe cutters are the best manual cutters for ductile iron and a great option for steel pipe. With good leverage from the tool's long handle, pipe snaps off squarely before wheel penetrates halfway through pipe. Rotary pipe cutters have heavy-duty frames.

How to use rotary cutter?
Place the rotary cutter on the pipe. And hand tighten the screw assembly. Make sure it is snug but not tight. Begin by rotating the cutter in the direction of the arrow one revolution around the pipe

Which direction do you turn a pipe cutter?
Open the cutter by turning the feed handle counter clockwise and place the cutter on the solidly held pipe so that the rollers are in contact with the pipe. Turn the screw handle clockwise until the cutter wheel makes contact with the pipe.

Which type of pipes can be cut easily using pipe cutter?
We will explore some of the most common types of pipe cutter and their uses further on in this guide, but as an overview, some of the primary materials that pipe cutters can cut include the following: Plastic pipes. Copper pipes. Steel pipes.

What is a pipe cutter used for ?
Pipe cutters are tools used for slicing or cutting pipes. They are commonly used by plumbers due to their reliability and efficiency. In addition to providing clean, professional-quality cuts, pipe cutters are often more convenient, fast, and easy to use than alternatives such as hacksaws.

FAQ 
Q1: Why choose us?
We are a professional manufacturer of pipe hot melt welding machine and pipe scissors.
Q2: Do you provide samples?
Yes, we could offer the sample for free of charge but freight is not included.
Q3: How long is your delivery time?
Generally it’s 3-7days if the goods are in stock, or it’s 25-30days if the goods are not in stock, and it vary a little according to quantity.
Q4: What is your terms of payment?
A: Payment under USD1,000, 100% T/T in advance.
B: Payment more than USD1,000, 30% T/T in advance, balance before shipment.
Q5: What is your packing?
A: usually by carton, and can be packed as your require.