Quick Response Fusion Welding Machine Polyethylene SHT250-2/4(A) For Energy

Quick Response polyethylene fusion welding machine SHT250-2/4(A) for Energy & Mining

Electrical planning tool with safety limit switch enables to start it only when it is locked in operation position6. Low starting pressure and high reliable seal structure.Separate two-channel timer records times in soaking and cooling phases.Consists of basic frame, planning tool, heating plate and support for planning tool and heating plate.

Common problems of various components of the hot melt machine when connecting PE pipes:

1. The maximum temperature of the heating plate of the heating plate reaches 250 °C, so be sure to pay attention to the following categories: ① Wear anti-cutting gloves ② Pay attention to the safety precautions of the actual operating staff. After the welding is completed, it should be placed in a special heating plate support frame. ③ The heating plate should be cooled before transportation to prevent fire.
④ After the electric welding is completed, put the heating plate in a safe area to prevent others from accidentally touching the burn. ⑤ Grasp the door handle when lifting the heating plate. Do not disconnect the switching power supply of the heating plate ⑧ Remember not to touch the heating plate with force
2. Milling cutter ① Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and free of dirt to prevent damage to the cutting blade ② Pipe (piece) cutting After the end, after the milling cutter disc stops rotating, take out the milling cutter disc and store it. ③ Hold the door handle when obtaining the milling cutter disc. ④ The milling cutter disc can only be rotated when it is installed on the welding frame. Do not arbitrarily adjust the toggle switch of the milling cutter
3. Hydraulic control cabinet ① Install the hydraulic components horizontally and firmly during operation, gradually charge the pipe to detect the drag force of the pipe, and lift the handles on both sides during transportation ② Remember not to place the hydraulic components perpendicular to the pipe. Place it to prevent oil leakage. ③ When making adjustments to this component, follow the relevant requirements of this manual, such as Instructions for Use
4. Frame ① Check the parts/materials to be welded to ensure that they are accurately clamped on the frame , to ensure the welding quality of electric welding. When heating, the actual operating staff should stand off the welding machine moderately. ② During electric welding, if the movable chuck and the fixed chuck collide, it is not necessary to use the main gate of the welding machine to shut down, only move the work The pressure adjustment lever can open the chuck. ③ When transporting the rack, make sure that the chucks are all tightened to prevent them from falling off.

Preparation for welding HDPE Pipe manual Butt Fusion Welding Machine 
1. Before operation, all equipment parts shall be placed on a stable and dry place.
2. Confirm that the power supply used meets the requirements of the equipment, the equipment is in good condition, and the electrical circuit is not damaged; the detection indicator works normally, the milling cutter blade is sharp, and the parts and operating tools are complete.
3. Replace the required fixture according to the outer diameter of the welded pipe.
 
Welding procedure for HDPE PIPE manual Butt Fusion Welding Machine

 

Application 

 
Company profile 
Zhuji Haitao Machinery Co., Ltd. is a manufacturer specializing in the production of various specifications of PPR hot melt machines (plastic pipe fusion welders), scissors, butt welders, and pressure test pumps. Since the establishment of the factory, our factory have always paid great attention to the research and development of new products and the training of professional and technical staff, and we are constantly exploring and innovating, and introducing advanced foreign technology.
Haitaoxing’ products have passed CE certification and won unanimous praise from the industry. Our factory adheres to the principle of honesty, friendliness, mutual benefit, and the business tenet of surviving on quality, development by reputation, and occupying the market with price. Facing new and old customers, we have established a complete after-sales service network system, and our products are exported to large, medium and small cities in China and all over the world.
The company is located in Huangtong Village, Ciwu Town, Zhuji City, 32 kilometers away from Hangzhou Xiaoshan International Airport and 2 kilometers away from the exit of HangJinQu Highway (Diankou, Ciwu). The transportation is convenient and the environment is beautiful. We sincerely welcome people of insight from all walks of life to visit, cooperate and develop together.
 

 
Our service: 
1) We offer 1 year warranty and free spare parts. (Except for wearing parts)
2) We offer voltage and frequency of motor customization service, such as 110v 60hz.
3) We can put your LOGO on machine plate or packing (need your authorization on brand)
4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.