 |
How to Cut Pipe and Tubing In plumbing systems, tubes and pipes can be formed of materials of different flexibility and density, such as PVC, PEX, cooper, galvanized steel and cast iron. When making plumbing repairs and improvements, use different pipe and tube cutters based on the type of material, ... Read More
|
| |
Intend Of Use. Butt Welding Machines connect PE, PP; PVDF plastic pipes with diameters from Dmin 40 to Dmax 2000 in proportion to machine sizes and their attachments through butt welding using a heating system. Area Of Use. Butt Welding machines can be used in all areas where liquids are transferred ... Read More
|
| |
There are various ways for pipes, fittings, flanges and valves to connect, socket weld and butt weld are the two popular. However, you might be confused about what are the differences between socket weld fittings and butt welding fittings, and which one would be best for your construction projects, ... Read More
|
| |
hen we cut PPR water pipes with pipe scissors, we often see white edges, just like the picture above. Many people say that there is a problem with such water pipes, which is the reason why the material is not good and calcium powder is added. Is that so? Let me tell you about it today. This ... Read More
|
| |
In the after-sales accident of PPR water pipes, there are not many cases of water pipes bursting, and most of them are caused by leakage of some solder joints. When winter comes and the temperature drops, we especially need to pay attention to the characteristics of PPR water pipes becoming brittle ... Read More
|
| |
The factors that affect the welding quality of PPR water pipes, master these, hot melt water pipes will not leak water The worst thing about home decoration is the leaking of the newly installed water pipes. In fact, the water leakage problem of the water pipe is rarely caused by the quality of the ... Read More
|
| |
Warning code and meaning warn! If a warning appears, the welding will be automatically aborted, which may cause wear of the pipe fittings. Ritmo S.p.A. declares that if the machine is dismantled privately after a warning, Ritmo will not be responsible. Power warning Warning 1- Power cord Possible ... Read More
|
| |
The hot-melt welding machine adopts a plate-drawing structure and uses an electric heating method. The whole machine is in the form of a frame, composed of three plates: an upper template, a lower template, and a hot template, and is equipped with a hot mold and an upper and lower plastic cold mold. ... Read More
|
| |
The main factors that determine the welding quality by hot melt butt joint parameters are as follows: 1. The temperature when the heat is absorbed PE80 national standard 210 degrees / plus or minus 10 degrees. British standard 233 degrees / plus or minus 3 degrees; PE100 national standard 225 ... Read More
|
| |
Users who have purchased electrofusion welding equipment naturally hope that the mechanical equipment can have relatively good quality and performance, as well as a long service life. The quality and performance of the mechanical equipment is good, so it can have a relatively good performance in the ... Read More
|
